ASUSTOR NAS Quick Installation Guide
3.2 Connecting and Powering on the NAS
•
Connect the NAS to its power supply.
•
Connect the NAS to your router, switch or hub using an Ethernet cable.
•
Press and hold down the power button for 1 – 2 seconds until the blue power LED
indicator is lit. This indicates that the NAS is now powered on. While the NAS is being
powered on, the green system status LED indicator will flash and the blue network
LED indicator will be lit as well.
•
The NAS is ready for operation once the green system status LED indicator has
stopped flashing and remains steadily lit. At this time, you should also hear a ‘beep’
from the system buzzer. Hardware installation is now complete. Please move on to
the software installation guide to configure your system settings.
Page 10 of 25