24
Installation Using a Direct Connection
Please see section
Troubleshooting
for installation instructions.
Shutting Down Your NAS
1. Confirm the function settings for the power button as shown in the graphic below. When the power button is
held down for 1.5 seconds you can decide whether to shut down the NAS or have it enter into sleep mode.
This setting may be access from within ADM by selecting: [Settings]
[Hardware]
[Power]
[Settings].
2.
Hold down the power button for 1.5 seconds. You should be able to hear a “beep” from the system buzzer.
Let go of the power button and the NAS will either shut down depending on your configuration.
