Asus Vintage V2-PE3, Руководство по эксплуатации

Страница: 58 / 85

4-8 Chapter 4: Motherboard info
6. ATX power connectors (20-pin EATXPWR, 4-pin ATX12V)
These connectors are for ATX power supply plugs. The plugs from
the power supply are designed to fit these connectors in only one
orientation. Find the proper orientation and push down firmly until the
connectors completely fit.
• Do not forget to connect the 4-pin ATX +12 V power plug;
otherwise, the system will not boot.
• Use of a PSU with a higher power output is recommended when
configuring a system with more power-consuming devices. The
system may become unstable or may not boot up if the power is
inadequate.
• The power suppply unit (PSU) available along with this barebone
system has a 24-pin plug. Match the 1-20 pins of this plug to the
ATX power connector and leave the 21-24 pins idle.
• Make sure that your power supply unit (PSU) can provide at least
the minimum power required by your system.
7. Internal audio connectors (4-pin CD, 4-pin AUX)
These connectors allow you to receive stereo audio input from sound
sources such as a CD-ROM, TV tuner, or MPEG card.
Enable the CD-IN function in the audio utility when using this connector.
ATX Power Connectors
®
ATX12V
+12V DC
GND
+12V DC
GND
ATXPWR
+3.3VDC
-12.0VDC
GND
PS_ON#
GND
GND
GND
-5.0VDC
+5.0VDC
+5.0VDC
PWR_OK
+12.0VDC
+3.3VDC
+3.3VDC
GND
+5.0VDC
GND
+5.0VDC
GND
+5VSB
Internal Audio Connectors
®
AUX
(white)
CD
(black)
Right Audio Channel
Left Audio Channel
Ground
Ground
Right A
udio Channel
Left A
udio Channel
Ground Ground