Asus V2-M3N8200 - V Series - 0 MB RAM Скачать руководство пользователя страница 86

Страница: 86 / 108

5-22

Chapter 5: BIOS setup

Memory Over Voltage [Auto]

Allows you to select the Memory Over Voltage. The increment is 6.25mV.

Configuration options: [Auto] [6.25mV] [12.5mV] [18.75mV] [25mV] ~ [393.75mV]

5.4.2

CPU Configuration

GART Error Reporting [Disabled]

This option should remain disabled for the normal operation. The driver developer

may enable it for testing purpose. Configuration options: [Disabled] [Enabled]

Microcode Updation [Enabled]

Allows you to enable or disable the microcode updation.

Configuration options: [Disabled] [Enabled]

Secure Virtual Machine Mode [Enabled]

Allows you to enable or disable the AMD Secure Virtual Machine mode.

Configuration options: [Disabled] [Enabled]

Cool ‘n’ Quiet [Enabled]

Allows you to enable or disable the generation of ACPI_PPC, _PSS, and _PCT

objects. Configuration options: [Disabled] [Enabled]

This option should

remain disabled for

the normal operation.

The driver developer

may enable it for

testing purpose.

CPU Configuration

Module Version: 13.20

AGESA Version: 3.1.8.0

Physical Count: 1

Logical Count: 1
AMD Athlon(tm) Processor 3200+

Revision: F2

Cache L1: 128KB

Cache L2: 128KB

Cache L3: N/A

Speed : 1800MHz, NB Clk: N/A

HT Frequency : 800MHz

Current FSB Multiplier: 9x

Maximum FSB Multiplier: 9x

Able to Change Freq. : Yes

uCode Patch Level : 0x62

GART Error Reporting

[Disabled]

Microcode Updation

[Enabled]

Secure Virtual Machine Mode

[Enabled]

Cool’n’ Quiet

[Enabled]

Содержание V2-M3N8200 - V Series - 0 MB RAM













































































































Результаты поиска

Содержание V2-M3N8200 - V Series - 0 MB RAM

Отзывы:

Бренды по названию

Популярные бренды

Asus V2-M3N8200 - V Series - 0 MB RAM, Руководство по установке

Результаты поиска

Содержание V2-M3N8200 - V Series - 0 MB RAM

Отзывы:

Бренды по названию

Популярные бренды