Asus V2-M3N8200 - V Series - 0 MB RAM Скачать руководство пользователя

Страница: 100 / 108

5-36

Chapter 5: BIOS setup

5.5.5

Hardware Monitor

CPU Temperature

[46ºC/114.5ºF]

MB Temperature

[34ºC/93ºF]

CPU Fan Speed

[3276RPM]

Chassis Fan Speed

[N/A]

Power Fsn Speed

[N/A]

VCORE Voltage

[ 1.232V]

3.3V Voltage

[ 3.328V]

5V Voltage

[ 4.915V]

12V Voltage

[11.916V]

Smart Q-FAN Function

[Disabled]

CPU Temperature [xxxºC/xxxºF]

MB Temperature [xxxºC/xxxºF]

The onboard hardware monitor automatically detects and displays the motherboard

and CPU temperatures. Select Ignored if you do not wish to display the detected

temperatures.

CPU Fan Speed [xxxxRPM] or [Ignored]

The onboard hardware monitor automatically detects and displays the CPU

fan speed in rotations per minute (RPM). If the fan is not connected to the

motherboard, the field shows N/A. Select Ignored if you do not wish to display the

detected speed.

Chassis/Power Fan Speed [xxxxRPM] or [N/A] or [Ignored]

The onboard hardware monitor automatically detects and displays the chassis/power

fan speed in rotations per minute (RPM). If the fan is not connected to the chassis, the

specific field shows N/A. Select Ignored if you do not wish to display the detected speed.

VCORE Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage

The onboard hardware monitor automatically detects the voltage output through

the onboard voltage regulators.

Smart Q-Fan Function [Disabled]

Allows you to enable or disable the ASUS Q-Fan feature that smartly adjusts the

fan speeds for more efficient system operation. Configuration options: [Disabled]

[Enabled]

CPU Temperature

Содержание V2-M3N8200 - V Series - 0 MB RAM













































































































Результаты поиска

Содержание V2-M3N8200 - V Series - 0 MB RAM

Отзывы:

Похожие инструкции для V2-M3N8200 - V Series - 0 MB RAM

Бренды по названию

Популярные бренды

Asus V2-M3N8200 - V Series - 0 MB RAM, Руководство по установке

Результаты поиска

Содержание V2-M3N8200 - V Series - 0 MB RAM

Отзывы:

Похожие инструкции для V2-M3N8200 - V Series - 0 MB RAM

Бренды по названию

Популярные бренды