ASUS USB-N10
Chapter 4: Using the ASUS WLAN Control Center
26
Activate Configuration
By default, auto roaming is disabled.
Select
Auto Roaming
to allow the network
adapter to switch to APs with better signal
automatically. Deselect
Auto Roaming
if
you want to connect to a specific AP using
a particular profile.
Status - Connection
You can view the current link statistics about the
Network adapter. These statistics are updated once
per second and are valid if the Network adapter is
correctly installed.
Frame Sent/Received
• Transmitted
: The number of frames that
were transmitted.
• Received:
The number of frames that were received.
Frame Error
• Transmitted
: The number of frames that were not successfully transmitted
• Received
: The number of frames that were not successfully received.
Connection Quality
• Signal Strength/Link Quality:
Shows the signal strength/link quality of the
access point or Ad Hoc node the Network adapter is currently connected to.
Ratings are: Excellent, Good, Fair, and Poor.
Overall Connection Quality
The overall connection quality is derived from the current signal strength. A graphic
chart uses percentage to show signal quality.