5-6
Chapter 5: RAID configuration
Rebuilding a RAID array
To rebuild a RAID array
1. From the
Array List
screen, use the up or down arrow keys to select a RAID
array, and then press <Enter>. The RAID Array details appear.
A new set of navigation keys is displayed on the bottom of the screen.
7. Press <Ctrl+X> to save settings and exit.
[Ctrl-X] Exit [
↑↓
] Select [B] Set Bootable [N] New Array [ENTER] Detail
Mediashield BIOS Apr 25 2008
- Array List -
Boot Status Vendor Array Size
Healthy NVIDIA MIRROR 447.14G
The Array List screen appears, where you can review the RAID arrays that
you have set up.
[R] Rebuild [D] Delete [C] Clear MBR [V] remove Vol [ENTER] Return
Array 4 : NVIDIA MIRROR 149.04G
- Array Detail -
RAID Mode: Mirrored
Striping Width: 1 Striping Block: 64K
Port Index Disk Model Capacity
0.0 0 WDC1600AAJS-22PSA0 149.05G
0.1 1 WDC1600AAJS-22PSA0 149.05G
A new set of navigation keys is displayed on the bottom of the screen.
Содержание TW100-E5 - iQuadro - 0 MB RAM
Страница 1: ...TW100 E5 Workstation User s Manual ...
Страница 88: ...Chapter 4 BIOS setup 4 34 ...
Страница 98: ...5 10 Chapter 5 RAID configuration ...
Страница 134: ...6 36 Chapter 6 Driver installation ...