Asus TS700-E9 Series Скачать руководство пользователя страница 102

Страница: 102 / 178

5-10

Chapter 5: BIOS Setup

5.5

Advanced menu

The Advanced menu items allow you to change the settings for the CPU and other system

devices.

Take caution when changing the settings of the Advanced menu items. Incorrect field

values can cause the system to malfunction.

5.5.1

Trusted Computing

The items in this menu allow you configure BIOS support for security device.

5.5.2

ACPI Settings

The items in this menu allow you to configure the system ACPI parameters.

Enable ACPI Auto Configuration

Allows you to enable or disable the BIOS ACPI Auto Configuration.

Configuration options: [Disabled] [Enabled]

Enable Hibernation

Allows you to enable or disable the ability of the system to hibernate (OS/S4 Sleep State).

Configuration options: [Disabled] [Enabled]

This option may be not be effective with some OS.

ACPI Sleep State

Allows you to select the highest ACPI sleep state the system will enter when the SUSPEND

button is pressed.

Configuration options: [Suspend Disabled] [S3 (Suspend to RAM)]

5.5.4

Super IO Configuration

The items in this menu allow you to configure the system Super IO Chip parameters.

Serial Port 1 Configuration

Allows you to set the parameters of Serial Port 1.

Serial Port

Allows you to enable or disable Serial Port.

Configuration options: [Disabled] [Enabled]

5.5.3

SMART Self Test

The items in this menu allow you to configure the SMART Self Test settings.

Содержание TS700-E9 Series



















































































































































































Результаты поиска

Содержание TS700-E9 Series

Отзывы:

Asus TS700-E9 Series, Руководство пользователя, Страница: 102 / 178

Результаты поиска

Содержание TS700-E9 Series

Отзывы: