manualshive.com logo in svg

Asus TS300-E5, Руководство пользователя

Поделиться
Скачать
Asus TS300-E5 Скачать руководство пользователя страница 167

ASUS TS300-E5

6-41

6.3.8 

Exiting the Intel

®

 Matrix Storage Manager

To exit the utility:

1.  From the utility main menu, select 

4. Exit

, then press <Enter>.

 

This window appears.

Are you sure you want to exit? (Y/N):

[

 

CONFIRM EXIT

 

]

2.  Press <Y> to exit or press <N> to return to the utility main menu.

6.3.9 

Setting the Boot array use MB BIOS Setup Utility

1.  When creating multi-raid via Intel(r) Matrix Storage Manager RAID, we would 

like to assign one array to be the boot drive. The following shows as the 

status of current arrays:

2.  Re-boot the system and press <Del> to enter the Motherboard BIOS Setup 

Utility during POST.

3.  Go to [Boot] menu —> [Boot Device Priority]. Then, select the desired boot 

array and use <+> or <-> key to change the boot device priority.

Содержание TS300-E5



























































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды