Asus TS300-E3 Скачать руководство пользователя страница 130

Страница: 130 / 204

6-2

Chapter 6: RAID conﬁguration

6.1

Setting up RAID

The motherboard comes with the following RAID solutions:

P5MT model

•

LSI Logic Embedded SATA RAID

technology embedded in the Intel

ICH7R

Southbridge supports up to two SATA hard disk drives and RAID 0, RAID 1,

and RAID 10 conﬁgurations.

P5MT-S model

•

Adaptec AIC-7901 PCI-X SCSI controller

supports SCSI hard disk drives and

RAID 0, RAID 1, and RAID 0+1 conﬁgurations.

6.1.1

RAID deﬁnitions

RAID 0

(Data striping) optimizes two identical hard disk drives to read and write

data in parallel, interleaved stacks. Two hard disks perform the same work as a

single drive but at a sustained data transfer rate, double that of a single disk alone,

thus improving data access and storage. Use of two new identical hard disk drives

is required for this setup.

RAID 1

(Data mirroring) copies and maintains an identical image of data from one

drive to a second drive. If one drive fails, the disk array management software

directs all applications to the surviving drive as it contains a complete copy of

the data in the other drive. This RAID conﬁguration provides data protection and

increases fault tolerance to the entire system. Use two new drives or use an

existing drive and a new drive for this setup. The new drive must be of the same

size or larger than the existing drive.

RAID 0+1

data striping and data mirroring combined without parity (redundancy

data) having to be calculated and written. With the RAID 0+1 conﬁguration you get

all the beneﬁts of both RAID 0 and RAID 1 conﬁgurations. Use four new hard disk

drives or use an existing drive and three new drives for this setup.

JBOD

(Spanning) stands for

Just a Bunch of Disks

and refers to hard disk drives

that are not yet conﬁgured as a RAID set. This conﬁguration stores the same

data redundantly on multiple disks that appear as a single disk on the operating

system. Spanning does not deliver any advantage over using separate disks

independently and does not provide fault tolerance or other RAID performance

beneﬁts.

If you want to boot the system from a hard disk drive included in a created RAID

set, copy ﬁrst the RAID driver from the support CD to a ﬂoppy disk before you

install an operating system to the selected hard disk drive. Refer to Chapter 6

for details.

Содержание TS300-E3













































































































































































































Результаты поиска

Содержание TS300-E3

Отзывы:

Похожие инструкции для TS300-E3

Бренды по названию

Популярные бренды

Asus TS300-E3, Руководство пользователя

Результаты поиска

Содержание TS300-E3

Отзывы:

Похожие инструкции для TS300-E3

Бренды по названию

Популярные бренды