background image

Copyright 2006© ASUSTeK COMPUTER INC. All Rights Reserved.

No part of this manual, including the products and software described in it, 

may be reproduced, transmitted, transcribed, stored in a retrieval system, or 

translated into any language in any form or by any means, except documentation 

kept  by  the  purchaser  for  backup  purposes,  without  the  express  written 

permission of ASUSTeK COMPUTER INC. ("ASUS").

ASUS provides this manual "as is" without warranty of any kind, either express 

or  implied,  including  but  not  limited  to  the  implied  warranties  or  conditions 

of merchantability or fitness for a particular purpose. In no event shall ASUS, 

its directors, officers, employees, or agents be liable for any indirect, special, 

incidental, or consequential damages (including damages for loss of profits, loss 

of business, loss of use or data, interruption of business and the like), even if 

ASUS has been advised of the possibility of such damages arising from any defect 

or error in this manual or product. 

Specifications  and  information  contained  in  this  manual  ae  furnished  for 

informational use only, and are subject to change at any time without notice, 

and  should  not  be  construed  as  a  commitment  by  ASUS.  ASUS  assumes  no 

responsibility or liability for any errors or inaccuracies that may appear in this 

manual, including the products and software described in it.

Product warranty or service will not be extended if: (1) the product is repaired, 

modified or altered, unless such repair, modification of alteration is authorized in 

writing by ASUS; or (2) the serial number of the product is defaced or missing.

Products and corporate names appearing in this manual may or may not be 

registered trademarks or copyrights of their respective companies, and are used 

only for identification or explanation and to the owners  benefit, without intent to 

infringe. 

E2667
First Edition V1.01
September  2006

Содержание RS162-E4 RX4





































































































































































Отзывы: