background image

2 - 1 9

2 - 1 9

2 - 1 9

2 - 1 9

2 - 1 9

A S U S   R S 1 6 1 - E 2 / P A 2

A S U S   R S 1 6 1 - E 2 / P A 2

A S U S   R S 1 6 1 - E 2 / P A 2

A S U S   R S 1 6 1 - E 2 / P A 2

A S U S   R S 1 6 1 - E 2 / P A 2

2.9

Removable components

You may need to remove previously installed system components when
installing or removing system devices, or when you need to replace
defective components. This section tells how to remove the following
components:

1.

System fans

2.

Device fan

3.

Power supply module

4.

Optical drive

5.

Motherboard

2.9.1

2.9.1

2.9.1

2.9.1

2.9.1

System fans

System fans

System fans

System fans

System fans

To uninstall the system fans:

To reinstall the system fan:

1.

Insert the fan to the fan cage.
Take note of the airflow
directional arrows embossed on
the fan side.

2.

Connect the system fan cable to
the fan connector on the
backplane board.

2.

Lift the fan, then set aside.

3.

Repeat step 1 to 2 to uninstall
the other system fans.

1.

Disconnect a system fan cable
from the fan connector on the
backplane board.

Содержание RS161-E2 - 0 MB RAM





























































































































Отзывы: