A S U S R S 1 6 0 - E 2 / C S 3
A S U S R S 1 6 0 - E 2 / C S 3
A S U S R S 1 6 0 - E 2 / C S 3
A S U S R S 1 6 0 - E 2 / C S 3
A S U S R S 1 6 0 - E 2 / C S 3
4 - 1 3
4 - 1 3
4 - 1 3
4 - 1 3
4 - 1 3
7 .
7 .
7 .
7 .
7 .
S e r i a l p o r t c o n n e c t o r ( 1 0 - 1 p i n C O M 2 )
S e r i a l p o r t c o n n e c t o r ( 1 0 - 1 p i n C O M 2 )
S e r i a l p o r t c o n n e c t o r ( 1 0 - 1 p i n C O M 2 )
S e r i a l p o r t c o n n e c t o r ( 1 0 - 1 p i n C O M 2 )
S e r i a l p o r t c o n n e c t o r ( 1 0 - 1 p i n C O M 2 )
This connector is for a serial (COM) port. Connect the serial port
module cable to this connector, then install the module to a slot
opening at the back of the system chassis.
The serial port module is purchased separately.
®
NCL-DSR1
NCL-DSR1 Serial port connectors
PIN 1
COM2
8 .
8 .
8 .
8 .
8 .
S S I
S S I
S S I
S S I
S S I power connectors (24-pin ATXPWR1,
power connectors (24-pin ATXPWR1,
power connectors (24-pin ATXPWR1,
power connectors (24-pin ATXPWR1,
power connectors (24-pin ATXPWR1, 8
8
8
8
8- p i n
- p i n
- p i n
- p i n
- p i n A T X 1 2 V 1
A T X 1 2 V 1
A T X 1 2 V 1
A T X 1 2 V 1
A T X 1 2 V 1)))))
These connectors are for SSI power supply plugs. The power supply
plugs are designed to fit these connectors in only one orientation.
Find the proper orientation and push down firmly until the connectors
completely fit.
•
Use of an SSI 12 V Specification 2.0-compliant power supply unit
(PSU) that provides a minimum power of 450 W is recommended
for a fully-configured system.
•
Do not forget to connect the 8-pin ATX +12 V power plug;
otherwise, the system will not boot up.
•
Use of a PSU with a higher power output is recommended when
configuring a system with more power consuming devices. The
system may become unstable or may not boot up if the power is
inadequate.
•
You must install a PSU with a higher power rating if you intend to
install additional devices.
®
NCL-DSR1
NCL-DSR1 ATX Power connectors
8-pin
GND
12V
GND
12V
GND
12V
GND
12V
For Power Supply
with 24-pin
Power Connector
24-pin Power Connector
+3 V
olts
+3 V
olts
Ground
+5 V
olts
+5 V
olts
Ground
Ground
Power OK
+5V Standby
+12 V
olts
-5 V
olts
+5 V
olts
+3 V
olts
-12 V
olts
Ground
Ground
Ground
PSON#
Ground
+5 V
olts
+12 V
olts
+3 V
olts
+5 V
olts
Ground
ATXPWR1
ATX12V1
