ROG STRIX Z590-E GAMING Series
1-13
Chapter 1
8.
SATA 6Gb/s connector
The SATA 6Gb/s connector allows you to connect SATA devices such as optical disc
drives and hard disk drives via a SATA cable.
If you installed SATA storage devices, you can create a RAID 0, 1, 5, and 10 configuration
with the Intel
®
Rapid Storage Technology through the onboard Intel
®
Z590 chipset.
•
The connectors are set to
[AHCI Mode]
by default. If you intend to create a SATA
RAID set using these connectors, set the SATA Mode item in the BIOS to
[Intel RST
Premium with Intel Optane System Acceleration (RAID)]
.
•
When M.2_4 is operating in SATA mode, SATA6G_2 will be disabled.
•
Before creating a RAID set, refer to the
RAID Configuration Guide
. You can
download the
RAID Configuration Guide
from the ASUS website.
Содержание ROG STRIX Z590-E GAMING Series
