Asus Republic of Gamers GT-AC2900, Руководство пользователя

Страница: 88 / 179

88
5. On the Port Forwarding List table, key in the following
information:
•
Service Name
: Enter a service name.
•
Port Range
: If you want to specify a Port Range for clients
on the same network, enter the Service Name, the Port
Range (e.g. 10200:10300), the LAN IP address, and leave the
Local Port empty. Port range accepts various formats such
as Port Range (300:350), individual ports (566,789) or Mix
(1015:1024,3021).
NOTES:
• When your network’s firewall is disabled and you set 80 as the
HTTP server’s port range for your WAN setup, then your http
server/web server would be in conflict with the router’s web user
interface.
• A network makes use of ports in order to exchange data, with
each port assigned a port number and a specific task. For
example, port 80 is used for HTTP. A specific port can only be used
by one application or service at a time. Hence, two PCs attempting
to access data through the same port at the same time would fail.
For example, you cannot set up Port Forwarding for port 100 for
two PCs at the same time.
• Local IP : Key in the client’s LAN IP address.
NOTE : Use a static IP address for the local client to make port
forwarding work properly. Refer to section 4.4 LAN for information.
• Local Port : Enter a specific port to receive forwarded
packets. Leave this field blank if you want the incoming
packets to be redirected to the specified port range.
• Protocol : Select the protocol. If you are unsure, select BOTH .
6. Click the Add to enter the port trigger information to the
list. Click the Delete button to remove a port trigger entry
from the list.
7. When done, click Apply .