manualshive.com logo in svg

Asus POLO SiS630(E) Ultra-AGP, Руководство пользователя

Поделиться
Скачать
Asus POLO SiS630(E) Ultra-AGP Скачать руководство пользователя страница 56

ASUS POLO User’s Manual

56

4. BIOS SETUP

4. BIOS SETUP

 Power Menu

Video Off Option [Suspend -> Off ]

This field determines when to activate the video off feature for monitor
power management. Configuration options: [Always On] [Suspend -> Off]

Video Off Method [DPMS OFF]

This field defines the video off features. The DPMS (Display Power
Management System) feature allows the BIOS to control the video display
card if it supports the DPMS feature. [Blank Screen] only blanks the screen
(use this for monitors without power management or “green” features. If set
up in your system, your screen saver does not run with [Blank Screen] selected).
[V/H SYNC+Blank] blanks the screen and turns off vertical and horizontal
scanning. Configuration options: [Blank Screen] [V/H SYNC+Blank] [DPMS
Standby] [DPMS Suspend] [DPMS OFF] [DPMS Reduce ON]

HDD Power Down [Disabled]

Shuts down any IDE hard disk drives in the system after a period of
inactivity as set in this user-configurable field. This feature does not affect
SCSI hard drives. Configuration options: [Disabled] [1 Min] [2 Min] [3
Min]...[15 Min]

Suspend-to-RAM Capability [Disabled]

Suspend-to-RAM (STR) is an energy-saving feature. In Suspend-to-RAM
state, all devices on the computer are turned off, except for the system RAM.
Thus, the PC only consumes less than 5 watts of power. Select [Enabled] if
your power supply can provide at least 720mA on the +5VSB lead to support
the STR function. If the expansion card you use on the motherboard do not
support the STR function, you must leave this field to the default setting
[Disabled]. Note that this  field is only effective if you are using Windows
98. Configuration options: [Enabled] [Disabled]

Suspend Mode [Disabled]

Sets the time period before the system goes into suspend mode.
Configuration options: [Disabled] [30 Sec] [1 Min] [2 Min]...[1 Hour]

PWR Button < 4 Secs [Soft Off]

When set to [Soft off], the ATX switch can be used as a normal system
power-off button when pressed for less than 4 seconds. [Suspend] allows
the button to have a dual function where pressing less than 4 seconds will
place the system in sleep mode. Regardless of the setting, holding the ATX
switch for more than 4 seconds will power off the system. Configuration
options: [Soft off] [Suspend]

Содержание POLO SiS630(E) Ultra-AGP















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды