manualshive.com logo in svg

Asus POLO SiS630(E) Ultra-AGP, Руководство пользователя

Поделиться
Скачать
Asus POLO SiS630(E) Ultra-AGP Скачать руководство пользователя страница 29

ASUS POLO User’s Manual

29

3. HARDWARE SETUP

Connectors

3. H/W SETUP

01

POLO

POLO IDE Connectors

NOTE: Orient the red markings
on the IDE ribbon cable to 

PIN 1

Primary IDE Connector

Secondary IDE Connector

PIN 1

3) Primary (Blue) / Secondary IDE Connectors  (40-1 pin IDE1/IDE2)

These connectors support the provided UltraDMA/66/33 IDE hard  disk ribbon
cable. Connect the cable’s blue connector to the primary (recommended) or
secondary IDE connector, then connect the gray connector to the UltraDMA/66/33
slave device (hard disk drive) and the black connector to the UltraDMA/66/33
master device. It is recommended that non-UltraDMA/66/33 devices be connected
to the secondary IDE connector. If you install two hard disks, you must configure
the second drive as a slave device by setting its jumper accordingly. Refer to the
hard disk documentation for the jumper settings. BIOS supports specific device
bootup (see 4.6. Boot Menu).  If you have more than two UltraDMA/66/33
devices, purchase another UltraDMA/66/33 cable.

NOTES:

1. Pin 20 on each IDE connector is removed to match the covered hole on the

UltraDMA cable connector. This prevents incorrect orientation when you
connect the cables.

2. The hole near the blue connector on the UltraDMA/66 cable is intentional.

TIP: You may configure two hard disks to be both Masters with two ribbon
cables – one for the primary IDE connector and another for the secondary
IDE connector.

IMPORTANT:

 Use only 40-pin 80-conductor IDE cables for UltraDMA/66 IDE

devices.

Содержание POLO SiS630(E) Ultra-AGP















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды