manualshive.com logo in svg

Asus POLO SiS630(E) Ultra-AGP, Руководство пользователя

Поделиться
Скачать
Asus POLO SiS630(E) Ultra-AGP Скачать руководство пользователя страница 32

32

ASUS POLO User’s Manual

3. HARDWARE SETUP

Connectors

3. H/W SETUP

9) ATX Power Supply Connector  (20-pin block ATXPWR)

This connector connects to an ATX power supply. The plug from the power supply
fits in only one orientation because of the different hole sizes. Find the proper
orientation and push down firmly making sure that the pins are aligned.

IMPORTANT:

 Make sure that the ATX power supply can supply at least 10mA

on the +5-volt standby lead (+5VSB). You may experience difficulty in turning
the system ON if the power supply cannot support the load. For Wake-On-LAN
support, the ATX power supply must supply at least 720mA +5VSB.

01

POLO

POLO ATX Power Connector

+3.3 Volts

-12.0 Volts

Ground

Power Supply On

Ground

Ground

Ground

NC

+5.0 Volts
+5.0 Volts

Power Good

+12.0 Volts

+3.3 Volts
+3.3 Volts

Ground

+5.0 Volts

Ground

+5.0 Volts

Ground

+5V Standby

01

POLO

POLO Internal Audio Connectors

CD In (Black)

Left Audio Channel

Right Audio Channel
Ground

MODEM

Modem-Out

Ground

Modem-In

8) Internal Audio Connectors (4-1 pin CD_IN, MODEM)

These connectors allow you to receive stereo audio input from sound sources
such as a CD-ROM. The MODEM connector allows the onboard audio to
interface with a voice modem card with a similar connector. It also allows the
sharing of mono_in (such as a phone) and a mono_out (such as a speaker) between
the audio and a voice modem card.

Содержание POLO SiS630(E) Ultra-AGP















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды