Asus PIKE 2308, Руководство пользователя

Страница: 18 / 62

2-6
Chapter 2: RAID configuration
6. The Create New Volume screen shows the disks you can add to make up the RAID
1 volume. Use the arrow key to select a disk, then move the cursor to the RAID Disk
column. To include this disk in the array, press <+>, <->, or <Space>.
By default, the RAID Disk field shows No before volume creation. This field is grayed out
under the following conditions:
•
The disk does not meet the minimum requirements for use in a RAID volume.
• The disk is not large enough to mirror existing data on the primary drive.
• The disk is already part of another volume.
Esc = Exit Menu F1/Shift+1 = Help
SPACE/+/- = Select disk for volume C = Create volume
LSI Corp Config Utility v7.05.01.00 (2010.02.09)
Create New Volume -- SAS2308
Volume Type: RAID 1
Volume Size(GB): -------
Slot Device Identifier RAID Drive Pred Size
Num Disk Status Fail (GB)
0 ATA WDC WD800JD-22LS1D06 [No] ---------- No 74
1 ATA WDC WD800JD-22LS1D06 [No] ---------- No 74
2 ATA WDC WD800JD-22LS1D06 [No] ---------- No 74
3 ATA WDC WD800JD-22LS1D06 [No] ---------- No 74