Asus PIKE 2008 IMR Скачать руководство пользователя

Страница: 4 / 72

About this guide

This user guide contains the information you need when installing and configuring

the server management board.

How this guide is organized

This guide contains the following parts:
•

Chapter 1: Product introduction
This chapter offers the PIKE 2008/IMR SAS RAID card features and the new

technologies it supports.

•

Chapter 2: RAID configuration

This chapter provides instructions on setting up, creating, and configuring

RAID sets using the available utilities.

•

Chapter 3: Driver installation
This chapter provides instructions for installing the RAID drivers on different

operating systems.

Where to find more information

Refer to the following sources for additional information and for product and

software updates.

1. ASUS websites

The ASUS website provides updated information on ASUS hardware and

software products. Refer to the ASUS contact information.

2. Optional documentation

Your product package may include optional documentation, such as warranty

flyers, that may have been added by your dealer. These documents are not

part of the standard package.

Содержание PIKE 2008 IMR









































































Результаты поиска

Содержание PIKE 2008 IMR

Отзывы:

Похожие инструкции для PIKE 2008 IMR

Бренды по названию

Популярные бренды

Asus PIKE 2008 IMR, Руководство пользователя

Результаты поиска

Содержание PIKE 2008 IMR

Отзывы:

Похожие инструкции для PIKE 2008 IMR

Бренды по названию

Популярные бренды