manualshive.com logo in svg

Asus P9D-I, Руководство пользователя

Поделиться
Скачать
Asus P9D-I Скачать руководство пользователя страница 73

ASUS P9D-I

4-21

4.4.6   USB Configuration

This allows you to make changes on the configuration settings of the USB.

Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.

        Advanced

Enables Legacy USB 

support. AUTO option 

disables legacy 

support if no USB 

devices are connected. 

DISABLE option will 

keep USB devices 

available only for 

EFI applications.

USB Configuration

USB Devices

      1 Mouse,2 Hubs

Legacy USB Support 

  [Enabled]

USB3.0 Support 

  [Enabled]

XHCI Hand-off 

  [Enabled]

EHCI Hand-off 

  [Disabled]

USB Mass Storage Driver Support [Enabled]

Port 60/64 Emulation 

  [Enabled]

USB hardware delays and time-outs:

USB transfer time-out 

  [20 sec]

Device reset time-out 

  [20 sec]

Device power-up delay 

  [Auto]

The 

USB Devices

 item shows the auto-detected values. If no USB device is detected, the 

item shows 

None

.

Legacy USB Support [Enabled]

Allows you to enable or disable the support for legacy USB devices. Setting to [Auto] allows 
the system to detect the presence of USB devices at startup. If detected, the USB controller 
legacy mode is enabled. If no USB device is detected, the legacy USB support is disabled. 
Configuration options: [Disabled] [Enabled] [Auto]

USB3.0 Support [Enabled]

Enables or disables the USB3.0 (XHCI) controller support. Configuration options: [Disabled] 
[Enabled]

XHCI Hand-off [Enabled]

This functions as a workaround for OSes without XHCI hand-off support. Configuration 
options: [Disabled] [Enabled] 

EHCI Hand-off [Enabled]

This functions as a workaround for OSes without EHCI hand-off support. Configuration 
options: [Disabled] [Enabled] 

USB Mass Storage Driver Support [Enabled]

This allows you to enable or disable the USB Mass Storage driver support. Configuration 
options: [Disabled] [Enabled]

Port 60/64 Emulation [Enabled]

This allows you to enable the I/O port 60h/64h emulation support. This should be enabled for 
the complete USB keyboard legacy support for non-USB aware OSes. Configuration options: 
[Disabled] [Enabled] 

Содержание P9D-I























































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды