Asus P5LD2 SE Скачать руководство пользователя страница 47

Страница: 47 / 120

ASUS P5LD2 SE

2-25

2. ICH7 Primary IDE connector (40-1 pin PRI_IDE)

This connector is for an Ultra DMA 133/100/66 signal cable. The Ultra

DMA 133/100/66 signal cable has three connectors: a blue connector

for the primary IDE connector on the motherboard, a black connector

for an Ultra DMA 133/100/66 IDE slave device (optical drive/hard

disk drive), and a gray connector for an Ultra DMA 133/100/66 IDE

master device (hard disk drive). If you install two hard disk drives,

you must configure the second drive as a slave device by setting its

jumper accordingly. Refer to the hard disk documentation for the

jumper settings.

• Pin 20 on the IDE connector is removed to match the covered hole

on the Ultra DMA cable connector. This prevents incorrect insertion

when you connect the IDE cable.

• Use the 80-conductor IDE cable for Ultra DMA 133/100/66 IDE

devices.

PRI_IDE

NOTE:

Orient the red markings

(usually zigzag) on the IDE

ribbon cable to PIN 1.

P5LD2 SE IDE Connector

P5LD2 SE

Below:Mic In

Center:Line Ou

Top:Line In

2.7.2 Internal connectors

1. Floppy disk drive connector (34-1 pin FLOPPY)

This connector is for the provided Floppy Disk Drive (FDD) signal

cable. Insert one end of the cable to this connector, then connect the

other end to the signal connector at the back of the floppy disk drive.

Pin 5 on the connector is removed to prevent incorrect cable connection

when using a FDD cable with a covered Pin 5.

FLOPPY

NOTE:

Orient the red markings on

the floppy ribbon cable to PIN 1.

PIN 1

P5LD2 SE Floppy Disk Drive Connector

P5LD2 SE

Below:Mic In

Center:Line Ou

Top:Line In

Содержание P5LD2 SE

























































































































Результаты поиска

Содержание P5LD2 SE

Отзывы:

Похожие инструкции для P5LD2 SE

Бренды по названию

Популярные бренды

Asus P5LD2 SE, Руководство по установке

Результаты поиска

Содержание P5LD2 SE

Отзывы:

Похожие инструкции для P5LD2 SE

Бренды по названию

Популярные бренды