Asus P5G43 Скачать руководство пользователя страница 40

Страница: 40 / 112

2-22

Chapter 2: Basic installation

3. Connect the gray interface of the IDE ribbon cable to the IDE connector on

the drive.

4. If you install two IDE hard disk drives, connect the black interface of the IDE

ribbon cable to the IDE connector on the second (Slave) IDE hard disk drive.

5. Connect a 4-pin power plug from the power supply unit to the power

connector at the back of the drive(s).

• If you will install only one hard disk drive, make sure to configure your hard

disk drive as Master device before connecting the IDE cable and power

plug. Refer to the HDD documentation on how to set the drive as a Master

device.

• If you will install two IDE hard disk drives, configure the other device as

Slave.

2.9

Installing the card reader

An optional card reader module (see the figure below) is available with the system.

If you want to install the card reader into your system, follow the steps on the next

page.

Note: the card reader is optional and users need to purchase separately.

Содержание P5G43

















































































































Результаты поиска

Содержание P5G43

Отзывы:

Похожие инструкции для P5G43

Бренды по названию

Популярные бренды

Asus P5G43, Руководство по установке

Результаты поиска

Содержание P5G43

Отзывы:

Похожие инструкции для P5G43

Бренды по названию

Популярные бренды