manualshive.com logo in svg

Asus P4P800-F, Руководство пользователя, Страница: 46 / 65

Поделиться
Скачать
Asus P4P800-F Скачать руководство пользователя страница 46

ASUS P4P800-F motherboard user manual

2-7

2.3.1 Primary, Secondary, Third and Fourth

IDE Master/Slave

Type [Auto]

Select [Auto] to automatically detect an IDE hard disk drive. If automatic detection
is successful, Setup automatically fills in the correct values for the remaining fields
on this sub-menu. Configuration options: [Not Installed] [Auto] [CDROM] [ARMD]

Before attempting to configure a hard disk drive, make sure you have the correct
configuration information supplied by the drive manufacturer.

LBA/Large Mode [Auto]

This field configures the LBA mode. Select [Auto] to enable LBA mode if the device
supports it and the device is not already formatted with LBA Mode disabled.
[Disable] disables the LBA mode.

Block (Multi-Sector Transfer) [Auto]

This field configures the Multi-Sector Transfer Block. Select [Auto] to enable the
data to transfer from and to the device occurs multiple sectors at a time if the
device supports it. When [Disabled], the data transfer from and to the device
occurs one sector at a time.

PIO Mode [Auto]

This option lets you set a PIO (Programmed Input/Output) mode for the IDE
device. Modes 0 through 4 provide successive increase in performance.
Configuration options: [0] [1] [2] [3] [4]

DMA Mode [Auto]

This field enables you to select the DMA mode. Configuration options: [Auto]
[SWDMA0] [SWDMA1] [SWDMA2] [MWDMA0] [MWDMA1] [MWDMA2] [UDMA0]
[UDMA1] [UDMA2]

Содержание P4P800-F


































































Отзывы:

Нет отзывов