manualshive.com logo in svg

Asus P4P800-F, Руководство пользователя, Страница: 33 / 65

Поделиться
Скачать
Asus P4P800-F Скачать руководство пользователя страница 33

1-22

Chapter 1: Product introduction

5. Front panel audio connector (10-1 pin FP_AUDIO)

This is an interface for the Intel front panel audio cable that allows convenient
connection and control of audio devices.

By default, the pins labeled LINE OUT_R/BLINE_OUT_R and the pins LINE
OUT_L/BLINE_OUT_L are shorted with jumper caps. Remove the caps only
when you are connecting the front panel audio cable.

P4P800-F

®

P4P800-F Front Panel Audio Connector

FP_AUDIO

BLINE_OUT_L

MIC2

Line out_R

Line out_L

BLINE_OUT_R

NC

MICPWR

+5VA

AGND

4. Chassis intrusion connector (4-1 pin CHASSIS1)

This lead is for a chassis designed with intrusion detection feature. This
requires an external detection mechanism such as a chassis intrusion sensor
or microswitch. When you remove any chassis component, the sensor triggers
and sends a high-level signal to this lead to record a chassis intrusion event.

By default, the pins labeled “Chassis Signal” and “Ground” are shorted with a
jumper cap. If you wish to use the chassis intrusion detection feature, remove
the jumper cap from the pins.

P4P800-F

®

P4P800-F Chassis Alarm Lead

CHASSIS1

+5VSB_MB

Chassis Signal

GND

(Default)

Содержание P4P800-F


































































Отзывы:

Нет отзывов