Asus P4P800-F Скачать руководство пользователя страница 28 | Manualshive

Страница: 28 / 65

Asus P4P800-F Скачать руководство пользователя страница 28

ASUS P4P800-F motherboard user manual

1-17

P4P800-F

®

P4P800-F Communication & Networking
Riser Slot

1.10.4 CNR slot

The Communications and Networking Riser (CNR) slot supports interface cards
that integrates audio, modem, and network functionality.

The CNR specification supports interfaces including:

•

Audio Codec ‘97 (AC ’97) - for audio and/or modem functions

•

System Management Bus (SMB) - for Plug-n-Play functionality

•

Power - to provide the signals required for power management, and the main

power supplies to operate the CNR circuitry

The CNR is tagged to replace the current Audio Modem Riser (AMR) slot because
of its flexibility and added features. Also, the CNR slot does not take up the
motherboard space for one PCI slot because it is a shared slot; rather, it provides
you more options.

1.10.5 PCI slots

There are five 32-bit PCI slots on this motherboard. The slots support PCI cards
such as a LAN card, SCSI card, USB card, and other cards that comply with PCI
specifications. The following figure shows a LAN card installed on a PCI slot.

«
...
26
27
28
29
30
...
»

Содержание P4P800-F


































































Отзывы:

Нет отзывов