ASUS P/I-P65UP8 User’s Manual
25
III. INSTALLATION
(Connectors)
III. INST
ALLA
TION
3. Parallel Printer Connector (26-1 pin PRINTER)
This connector supports the included parallel port ribbon cable with mounting
bracket. Connect the ribbon cable to this connector and mount the bracket to the
case on an open slot. You can make available the parallel port and choose the
IRQ Onboard Parallel Port in Chipset Features of the BIOS SOFTWARE.
(Pin 26 is removed to prevent inserting in the wrong orientation when using
ribbon cables with pin 26 plugged)
Parallel Port Connector
Orient the red stripe on the
parallel ribbon cable to Pin 1
For the parallel port connector to be available,
connect the included parallel (25-pin female)
cable set to a free expansion port.
TIP: You may also remove the bracket
connectors and mount them directly to
the case to save expansion slot space.
R
Pin 1
4. Serial Port COM1 and COM2 Connectors (Two 10-1 pin COM1 & COM2)
These connectors support the provided serial port ribbon cables with mounting
bracket. Connect the ribbon cables to these connectors and mount the bracket to
the case on an open slot. You can make available the serial port and choose the
IRQ Onboard Serial Port in Chipset Features of the BIOS SOFTWARE. (Pin
10 is removed to prevent inserting in the wrong orientation when using
ribbon cables with pin 10 plugged)
R
Serial Port Connectors
For the serial port connectors to be available,
connect the included serial cable set from
COM1 (using 9-pin male) and COM2 (using
25-pin male) to a free expansion port.
TIP: You may also remove the bracket
connectors and mount them directly to
the case to save expansion slot space.
Orient the red stripe on the
serial ribbon cable to Pin 1
COM 2
Pin 1
COM 1
Pin 1
