Asus K8S-MX Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 84

background image

vi

Notices

Federal Communications Commission Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:

•

This device may not cause harmful interference, and

•

This device must accept any interference received including interference that

may cause undesired operation.

Canadian Department of Communications Statement

This digital apparatus does not exceed the Class B limits for radio noise
emissions from digital apparatus set out in the Radio Interference
Regulations of the Canadian Department of Communications.

This class B digital apparatus complies with Canadian ICES-003.

The use of shielded cables for connection of the monitor to the graphics card is
required to assure compliance with FCC regulations. Changes or modifications
to this unit not expressly approved by the party responsible for compliance
could void the user’s authority to operate this equipment.

Where to find more information

Refer to the following sources for additional information and for product and
software updates.

1. ASUS Websites

The ASUS website provides updated information on ASUS hardware and
software products. The ASUS websites are listed in the ASUS Contact
Information on the inside front cover.

2. Optional Documentation

Your product package may include optional documentation, such as warranty
flyers, that may have been added by your dealer. These documents are not
part of the standard package.

«
...
4
5
6
7
8
...
»

Содержание K8S-MX





















































































Отзывы:

Нет отзывов

Похожие инструкции для K8S-MX

Бренд: EPOX Страницы: 83

Бренд: EPOX Страницы: 9

microComponents mp6-XEVA

Бренд: Bartels Mikrotechnik Страницы: 9

Бренд: Texas Instruments Страницы: 6

Бренд: Mercury Страницы: 57

Бренд: Ublox Страницы: 22

Бренд: MSI Страницы: 92

Бренд: Texas Instruments Страницы: 21

Z77A-GD65 GAMING series

Бренд: MSI Страницы: 98

Бренд: ASROCK Страницы: 2

Бренд: Protek Страницы: 2

Бренд: SOYO Страницы: 29

Бренд: Contec Страницы: 2

Бренд: Asahi KASEI Страницы: 31

Бренд: Asus Страницы: 40

Бренд: Asus Страницы: 68

P5QL-VM - DO/CSM Micro ATX Motherboard

Бренд: Asus Страницы: 45

P5QPL-AM - Motherboard - Micro ATX

Бренд: Asus Страницы: 60

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды