Asus K8S-MX Скачать руководство пользователя страница 74 | Manualshive

Страница: 74 / 84

background image

3-6

Chapter 3: Software support

3.3

RAID configurations

The SIS 965L southbridge comes with a RAID controller that allows you to
configure Serial ATA hard disk drives as RAID sets. The motherboard supports the
following RAID configurations.

RAID 0 (Data striping) optimizes two identical hard disk drives to read and write
data in parallel, interleaved stacks. Two hard disks perform the same work as a
single drive but at a sustained data transfer rate, double that of a single disk alone,
thus improving data access and storage. Use of two new identical hard disk drives
is required for this setup.

RAID 1 (Data mirroring) copies and maintains an identical image of data from one
drive to a second drive. If one drive fails, the disk array management software
directs all applications to the surviving drive as it contains a complete copy of the
data in the other drive. This RAID configuration provides data protection and
increases fault tolerance to the entire system. Use two new drives or use an
existing drive and a new drive for this setup. The new drive must be of the same
size or larger than the existing drive.

JBOD (Spanning) stands for Just a Bunch of Disks and refers to hard disk drives
that are not yet configured as a RAID set. This configuration stores the same data
redundantly on multiple disks that appear as a single disk on the operating system.
Spanning does not deliver any advantage over using separate disks
independently and does not provide fault tolerance or other RAID performance
benefits.

If you want to boot the system from a hard disk drive included in a RAID set,
copy first the RAID driver from the support CD to a floppy disk before you install
an operating system to a selected hard disk drive. Refer to section “3.4 Creating
a RAID driver disk” for details.

3.3.1 Installing hard disks

The motherboard supports Serial ATA hard disk drives. For optimal performance,
install identical drives of the same model and capacity when creating a disk array.

Installing Serial ATA (SATA) hard disks

To install the SATA hard disks for a RAID configuration:

1. Install the SATA hard disks into the drive bays.

2. Connect the SATA signal cables.

3. Connect a SATA power cable to the power connector on each drive.

«
...
72
73
74
75
76
...
»

Содержание K8S-MX





















































































Отзывы:

Нет отзывов

Похожие инструкции для K8S-MX

Бренд: Ampro Страницы: 72

Бренд: J&W Страницы: 28

Бренд: National Semiconductor Страницы: 32

MS-6191 Micro ATX IR2

Бренд: MSI Страницы: 86

Бренд: Texas Instruments Страницы: 47

Бренд: Intel Страницы: 97

Бренд: JETWAY Страницы: 48

Бренд: DFI Страницы: 67

PP-I7RS400 PURE PERFORMANCE II

Бренд: Sapphire Audio Страницы: 44

Бренд: Texas Instruments Страницы: 18

Бренд: Linear Technology Страницы: 7

X570 PHANTOM GAMING 4

Бренд: ASROCK Страницы: 196

880GM-LE - V1.0

Бренд: ASROCK Страницы: 60

Бренд: ASROCK Страницы: 244

Бренд: MSI Страницы: 90

Бренд: Octek Страницы: 84

Бренд: Freescale Semiconductor Страницы: 17

Бренд: Fujitsu Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды