manualshive.com logo in svg

Asus INET-810, Руководство пользователя

Поделиться
Скачать
Asus INET-810 Скачать руководство пользователя страница 42

35

Chapter 6

DHCP

This Chapter explains the settings on the DHCP Server screen

Overview

A DHCP (Dynamic Host Configuration Protocol) server provides a valid IP address,
Gateway address and DNS addresses to a DHCP client (PC or device) upon request.

The Internet Router can act as a DHCP server. The default value is ON (enabled),
and use of this feature is strongly recommended. Normally, the default values
should not need to be changed.

The PCs must be configured to act a DHCP clients. See page 16 for details of this
procedure.

DHCP Server Screen

This screen can be used to:

<

 

Disable the DHCP server function

<

 

Change the range of IP Address allocated to PCs by the DHCP server.

<

 

Increase the number of DHCP clients which can be accepted. (Default is 50,

maximum is 253).

This screen is reached by the Advanced – DHCP Server hyperlink. An example
screen is shown below.

6

Содержание INET-810



























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды