manualshive.com logo in svg

Asus INET-810, Руководство пользователя

Поделиться
Скачать
Asus INET-810 Скачать руководство пользователя страница 29

Internet Router User Guide

22

e.g.   555-555-1234-0101
(Where 555-555-1234 is the phone number, and
0101 is the device ID.)
However, there is wide variation in SPID formats,
and you must use the method advised by your phone
company.

If your telephone company did not provide this
information, leave this blank.

SPDI (2

nd 

B Channel)

Enter the SPID for the 2

nd

 B Channel. (See above)

LAN Settings

We recommend that you use the DHCP server function in the Internet Router.

Ø

 

If you wish to use the built-in DHCP server:

No changes are required.

Ø

 

If your LAN already has a DHCP server:

=

 

Give the Internet Router an IP address compatible with the addresses allocated

by the DHCP server. (i.e. the last 3-digit number is NOT within the addresses
allocated by the DHCP server; the other numbers are the same as the addresses
allocated by the DHCP server.)

=

 

The Network Mask must be the same as the value used by the DHCP server.

=

 

If not already done, set DIP switch 2 ON to disable the DHCP server in the

Internet Router.

Ø

 

If you wish to use static (fixed) IP Addresses:

=

 

Give the Internet Router an IP Address within the same address range as PCs

on your LAN. (Only the last 3-digit number should be different for each device.)

=

 

The IP Sharer’s Network Mask must be the same value as PCs on your LAN.

Содержание INET-810



























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды