Asus H170I-PLUS D3, Руководство пользователя

Страница: 54 / 84

2.5.4 DRAM Frequency [Auto]
This item allows you to set the memory operating frequency. The configurable options vary
with the BCLK (base clock) frequency setting. Select the auto mode to apply the optimized
setting. Configuration options: [DDR3‑800MHz] [DDR3‑933MHz] [DDR3‑1066MHz] [DDR3‑
1200MHz] [DDR3‑1333MHz] [DDR3‑1400MHz] [DDR3‑1500MHz] [DDR3‑1600MHz] [DDR3‑
1700MHz]
Selecting a very high memory frequency may cause the system to become unstable! If this
happens, revert to the default setting.
2.5.5 GPU Boost
GPU Boost accelerates the integrated GPU for extreme graphics performance. Configuration
options: [Keep Current Settings] [Enabled]
2.5.6 EPU Power Saving Mode [Disabled]
ASUS EPU (Energy Processing Unit) sets the CPU in its minimum power consumption
settings. Enable this item to set lower CPU VCCIN and Vcore voltages and achieve the best
energy saving condition. Configuration options: [Disabled] [Enabled]
2.5.7 CPU SVID Support [Auto]
Disabling SVID Support stops the processor from commmunicating with the external voltage
regulator. Configuration options: [Auto] [Disabled] [Enabled]
2.5.8 DRAM Timing Control
The subitems in this menu allow you to set the DRAM timing control features. Use the
<+> and <‑> keys to adjust the value. To restore the default setting, type [auto] using the
keyboard and press the <Enter> key.
Changing the values in this menu may cause the system to become unstable! If this
happens, revert to the default settings.
2.5.9 DIGI+ VRM
CPU Load-Line Calibration [Auto]
Load‑line is defined by Intel VRM specification and affects the CPU power voltage. The CPU
working voltage will decrease proportionally depending on the CPU loading. Higher levels of
the load‑line calibration can get a higher voltage and a better overclocking performance but
increases the CPU and VRM thermal. Configuration options: [Auto] [Level 1‑8]
The boosted performance may vary depending on the CPU specification. Do not remove
the thermal module.
CPU Current Capability [Auto]
Allows you to configure the total power range, and extends the overclocking frequency range
simultaneously. Configuration options: [Auto] [100%] [110%] [120%] [130%] [140%]
Choose a higher value when overclocking, or under a high CPU loading for extra power
support.
2-20 Chapter 2: Getting started