Asus E3060 WiFi-AP Solo Скачать руководство пользователя страница 57

Страница: 57 / 59

A-4

Federal Communications Commission Statement

This device complies with FCC Rules Part 15. Operation is subject to the

following two conditions:

• This device may not cause harmful interference, and
• This device must accept any interference received, including interference

that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a

class B digital device, pursuant to Part 15 of the Federal Communications

Commission (FCC) rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This

equipment generates, uses, and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on,

the user is encouraged to try to correct the interference by one or more of

the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

CAUTION!

You are cautioned that changes or modifications not expressly

approved by the party responsible for compliance could void your authority

to operate the equipment.

Reprinted from the Code of Federal Regulations #47, part 15.193, 1993.

Washington DC: Office of the Federal Register, National Archives and Records

Administration, U.S. Government Printing Office.

Safety statements

Содержание E3060 WiFi-AP Solo




























































Результаты поиска

Содержание E3060 WiFi-AP Solo

Отзывы:

Похожие инструкции для E3060 WiFi-AP Solo

Бренды по названию

Популярные бренды

Asus E3060 WiFi-AP Solo, Руководство пользователя

Результаты поиска

Содержание E3060 WiFi-AP Solo

Отзывы:

Похожие инструкции для E3060 WiFi-AP Solo

Бренды по названию

Популярные бренды