3-22
2. Set up the
operation
channel
and the
wireless network
security settings
. The
operation channel and
security settings must
be identical with the Ad-
hoc nodes you want to
connect. Click
Finish
to
apply and return to the
setup utility.
3. To connect an Ad-hoc node, you must manually set up the IP address of
WiFi-AP Solo. Double-click the wireless icon in the system tray -> click
Properties
-> double-click Internet Protocol (TCP/IP) to open the IP
configuration page.
Make sure that the IP address of the
ake sure that the IP address of the
WiFi-AP Solo is within the same subnet
as that of the station. For example, if the
IP address of the station is 192.168.0.1,
then the IP address of WiFi-AP Solo
must be 192.168.0.X, where X = 2 ~
254. When the setup is complete, click
OK
.
4. Click the
Status
button of the
setup utility to check whether the
connection is established.
Refer to Appendix for the available wireless LAN channels in your country
or region.
