AP2300 Hardware Reference Guide
9
1. Introduction
1. Introduction
9
1. Introduction
Features
AP2300 Hardware Reference Guide
• 1-3
Features
The AP2300 is configured on the ASUS CUR-DLS smart motherboard which
uses the ServerSet
TM
chipset from ServerWorks
®
, supporting dual Pentium
III processors and 133MHz Front Side Bus in order to accelerate even the
most complicated server tasks. The following are highlights to this server’s
many features. For additional features and details, read the motherboard
User’s Manual included with this server package.
Motherboard: ASUS CUR-DLS
•
Processor: Dual Intel
®
Pentium III FC-PGA processors running at
133MHz or 100MHz Front Side Bus.
•
Memory: Four 168-pin DIMM sockets for 16MB-4GB PC133 regis-
tered SDRAM with ECC support.
•
Onboard SCSI (optional): LSI
®
Ultra160/Ultra2-Wide SCSI controller
to support up to 30 SCSI devices on dual channels.
•
Onboard LAN: Intel
®
82559 Fast-Ethernet LAN controller.
•
Onboard VGA: ATI
®
Rage XL VGA controller with 4MB PC100
SDRAM to support one VGA connector and one DFP (Digital Flat
Panel) connector.
•
Super Multi-I/O: Two PCI Bus Master IDE Ports with Ultra DMA/33
support, one floppy, two serial COM ports, one parallel port, one PS/2
keyboard, one PS/2 mouse, one RJ-45 LAN port, two USB ports, and
one IrDA connector.
•
Expansion Slots: Six or seven PCI slots (33 or 66MHz, depending on
model), and one ASMC slot for IPMI (Intelligent Platform Manage-
ment Interface) compliant management solution.
Chassis: AS-30
•
Chassis: Tower server chassis with rack-mount rail tracks.
•
Backplane: Wide-SCSI backplane board with LVDS support, remote
SCSI ID DIP switches and power to support 5 SCSI SCA hard drives.
•
Power: ATX 300W redundant power supply with optional standard
400W power supply.
•
Device Bays: Support for one 3.5inch floppy device, three 5.25inch
devices, five hot-swappable hard disk drives in removable aluminum
trays.
