32
4. Hardware Setup
4. Hardware Setup
AP2300 Hardware Reference Guide
The SCSI backplane of this server is comprised of one SCSI board (DA-
BP5E) with Ultra2 SCSI connectors, power inputs, and SCSI ID DIP
switches. This configuration allows Ultra2 SCSI SCA hard disk drives to be
docked into the server. The SCSI board (DA-BP5E) does not have auto
termination, therefore the included terminator block must be used on the
end connector.
• 4-12 SCSI Backplane
SCSI Backplane
1” Tray
Connector #1 or 5
1” Tray
Connector #5 or 1
1” Tray
Connector #4 or 2
1” Tray
Connector #3
1” Tray
Connector #2 or 4
SCSI Backplane
Back Side
1.6” Tray
Connector #1
1.6” Tray
Connector #3B
1.6” Tray
Connector #5B
Fan Control Board
Connector
SCSI Backplane
Front Side
Power
Connector
SCSI ID Configuration
DIP Switches
Power
Connector
SMB Out
SMB In
The provided
terminator must
be placed on
this bottom
SCSI connector.
Connects to a
SCSI controller
through the
SCSI cable
