20
IV. Hardware Setup
AP200 Hardware Reference Guide
IV
. HW Setup
Motherboard
Chassis Intrusion Photo Sensor
This motherboard has a photo sensor onboard, which detects extreme levels
of light entering the chassis such as when the chassis is opened, and sends a
signal to the ASMA software in such an event. To enable this function,
Jumper18 must be set to Enable and an external battery must be connected
to the motherboard’s external battery connector. If you want to work on the
inside of the chassis when an external battery is connected, you should dis-
able Jumper18 to save the battery power.
Panel Connections
Several wires should be connected to the motherboard for the IDE/SCSI
activity, power, and message indicators on the front panel. Panel connec-
tions also allow for an ATX power button, reset switch, and speaker. Con-
nect the chassis front panel wires as illustrated:
H.D.D. LED
White
Red (+)
Power SW
Black
Red (+)
Turbo LED
Yellow (+)
White
Black (+)
White
Speaker
Button Cell Battery
for motherboard
BIOS and clock
Chassis Panel
Connectors
JP18
EXTBATT
IR
Reset SW
Violet (+)
White
Power LED
White
Green (+)
Yellow
White
Green
White
Black
Red
Violet
White
White
Red
Black
White
P2B-D/DS Chassis Intrusion Photo Sensor
1
1
R
Chassis Intrusion
Photo Sensor
JP18
EXTBATT
Photo Sensor Setting
Enable
Disable
JP18
1 2 3
