Asus AP1710-I5 Скачать руководство пользователя страница 14

Страница: 14 / 60

1-2

ASUS AP1710-I5

1.1

System Features

The ASUS AP1710-I5 server is a stylish server system featuring the
ASUS PRL-DL motherboard. The server supports the Intel

Xeon

™

processor in a 604-pin socket, and includes the latest I/O, LAN, and
video technologies through the chipsets embedded on the
motherboard.

The following are highlights of the server’s many features:

•

Chassis: Pedestal or rackmount 5U with removable front door
bezel and chassis foot stand or roller-wheels.

•

Motherboard: ASUS PRL-DL

•

Chipset: RCC Grand Champion SL Server 3.1 (GCSL), RCC
Champion South Bridge 6.0 (CSB6)

•

Memory: Supports four 184-pin DDR DIMM sockets, PC2100/
PC1600 registered ECC DDR DIMMs, 128MB to 4GB system
memory.

•

Processor: Support for two Intel

Xeon

processor up to 3.06

GHz frequency with 35º ambient 85% CPU utilization.

•

Network Controller: Intel

82540 Gigabit Ethernet controller

•

Drive Controller: LSI 53C1010R/32-bit/33MHz Dual Ultra-160
channels. Two UltraDMA 100 IDE channels and one ATA66 IDE
channel.

•

Graphics: ATI RAGE-XL PCI with 8MB PC-100 SDRAM video
memory

•

Onboard IO: 1 X PS/2 mouse port, 1 X PS/2 keyboard slot, 1 X
serial ports, 1 X 15-pin VGA port, 1 X floppy drive slot, 3 X IDE
ports, 4 X USB ports, 1 X RJ-45 LAN port, 2 X 68-pin SCSI
connectors

•

Special IO: IPMB connector, SM-Bus

•

Expansion: 4 X 64-bit/33Mhz 3V PCI slots, 1 X 32-bit/33Mhz
5V PCI slot

•

Device Bays: 6 X hot-swap trays for ATA 133 hard drives, 3 X
5.25 inch bay, 1 X floppy disk drive bay.

•

Power Supply: 500W redundant power supply with single power
module.

•

Hardware Monitors: Voltage, temperature, Automatic System
Restart (ASR), fan speed.

Содержание AP1710-I5





























































Результаты поиска

Содержание AP1710-I5

Отзывы:

Похожие инструкции для AP1710-I5

Бренды по названию

Популярные бренды

Asus AP1710-I5, Руководство пользователя

Результаты поиска

Содержание AP1710-I5

Отзывы:

Похожие инструкции для AP1710-I5

Бренды по названию

Популярные бренды