40
Chapter 3: Hardware Setup
SCSI Hard Disk Drives
The system comes with three externally accessible hard disk drive
bays.
SCSI HDD Mounting
Place the SCSI hard disk
drive to the hot-swap drive
tray and secure it with four
screws as shown. Ensure
the correct drive tray
orientation before
installing the HDD.
Take note of the drive tray orientation before you slide it out.
The tray will not fit back into the bay if you insert it the wrong
way.
IMPORTANT
In each of the HDD bays
is a hot-swap tray for
mounting a hard disk
drive. Flip open the tray
levers to release the tray,
then slide the tray out of
the chassis.
Hot-Swap Drive Tray
Tray Levers
