Asus AGP-V5200, Руководство пользователя

Страница: 11 / 32

•
•
•
•
•
11 The Ultimate Windows NT Workstation Graphics Accelerator
The instructions in this chapter discuss important static electricity precautions
and procedures for installing the ASUS AGP-V5200 graphics accelerator to
your computer. The board will have been configured for the options installed
at the factory. Before installing the board, check that the jumper settings (see
board layout) are correct and that you have taken note of the static electricity
precautions.
1 Unplug your computer.
2 Before handling any components or touching anything inside the system
unit, discharge your body static electric charge by using a grounded wrist
strap. If you do not have one, hold onto a grounded surface. If the system
unit is connected to a grounded outlet, you can touch a suitable part of the
system metal chassis.
3 Do not remove boards from their antistatic bags until you are ready to in-
stall them.
4 When handling boards, hold them by their edges and their metal mounting
brackets. Avoid touching components on the board and the edge connec-
tors that plug into the expansion slots.
5 Avoid plastic, vinyl and styrofoam in your work area.
2
Hardware Installation
Static Electricity Precautions