Asus AGP-V5200, Руководство пользователя

Страница: 12 / 32

•
•
•
•
•
12 ASUS AGP-V5200
Installing the ASUS AGP-V5200 in your system is simple. To install the board,
follow these steps:
1 Switch off your system and all peripheral devices.
2 Follow the static precautions described on the preceding page.
3 Remove the cover from your system.
4 Remove any existing video boards installed in the system.
To do this, detach the monitor cable from an existing video board, remove the
screw that holds the board in place and then pull it out from its expansion slot.
Store the old video board in an antistatic bag.
5 Find the AGP expansion slot in your system.
6 Remove the metal cover plate from the slot you have chosen and put the
screw to one side.
7 Ensure the onboard jumpers are correctly set on your AGP-V5200, which should
be on their default setting (
see board layout).
8 Align the board AGP slot connector with the expansion slot in your PC and
gently lower and push the board into the free slot.
9 Secure the board to the expansion slot with the screw you removed from the
metal plate.
10 Replace the cover on your system and plug in the power cord.
11 Reattach the video cable to the video output connector.
12 Turn on the monitor and power up the system.
Installing the ASUS AGP-V5200