Asus AAEON FWS-2365, Руководство пользователя

Страница: 47 / 95

Chapter 3 – AMI BIOS Setup 47
Deskt
op
Net
work
Ap
plian
ce
FW
S-
2365
Options Summary
Data bit 7
8 Optimal Default, Failsafe Default
Data Bits
Parity
None Optimal Default, Failsafe Default
Even
Odd
Mark
Space
A Parity bit can be sent with the data bits to detect some transmission errors.
Even: parity bit is 0 if the num of 1’s in the data bits is even.
Odd: parity bit is 0 if the num of 1’s in the data bits is odd.
Stop Bits 1 Optimal Default, Failsafe Default
2
Stop bits indicate the end of a serial data packet. (A start bit indicates the
beginning). The standard setting is 1 stop bit. Communication with slow devices
may require more than 1 stop bit.
Flow control
None Optimal Default, Failsafe Default
Hardware RTS/CTS
Flow control can prevent data loss from buffer overflow. When sending data, if the
receiving buffers are full, a 'stop' signal can be sent to stop the data flow. Once the
buffers are empty, a 'start' signal can be sent to re-start the flow. Hardware flow
control uses two wires to send start/stop signals.
VT-UTF8 Combo Key
Support
Enabled Optimal Default, Failsafe Default
Disabled
Enable VT-UTF8 Combination Key Support for ANSI/VT100 terminals.
Recorder Mode
Disabled Optimal Default, Failsafe Default
Enabled
With this mode enabled only text will be sent. This is to capture Terminal data.
Resolution 100x31
Disabled Optimal Default, Failsafe Default
Enabled
Enables or disables extended terminal resolution.
Putty KeyPad
VT100 Optimal Default, Failsafe Default
LINUX
XTERMR6
SCO
ESCN
VT400
Select FunctionKey and KeyPad on Putty.