STATUS
PROBLEM
SOLUCION
Check ROTARION electrical connection
cable.
Check
the
connection
of
white
ROTATION PHOTO cables connected to
the Red / Black connector on the
bottom of the ROTARION.
Check the status of the power supply.
Shutter has advanced
but does not touch any
optics,
eyepiece
or
ROTARION
PRIMEFOCUS.
YES
The distance between your optics and
the shutter is too much, see Chapter A
Section 8, Collimation and Shutter
Height Adjustment, and reduce shutter
clearance by the manual collimation
arms and nuts.
Shutter has advanced
but does
not touch
optics,
eyepiece
or
ROTARION
PRIMEFOCUS.
YES
The distance between some optics and
the shutter is too much, see Chapter A,
Section
3
Equal
Height
between
eyepieces and optics.
The distance between your optics and
the shutter is insufficient, see Chapter
A Section 8, Collimation and Shutter
Height Adjustment, and increase the
shutter
clearance by
the manual
collimation arms and nuts.
Check ROTARION electrical connection
cables.
Check
the
connection
of
white
ROTATION PHOTO cables connected to
the Red / Black connector on the
bottom of the ROTARION.
Check the status of the power supply.
Shutter has advanced
but
then
sometimes
recedes.
YES
The distance between some optics and
the obturator
is
insufficient,
see
Chapter A, Section 3 Equal Height
between eyepieces and optics.
The optics or eyepieces
are not centered when I
look
through
the
shutter
without
the
camera.
YES
The collimation of the 3 arms is not
correct, see Chapter A, Section 8. Re-
adjust the heights of the stainless steel
arms.
The Red Radiators are
hot.
NO
It is normal, the radiators must be
between hot and temperate, but in no
case can cause burns.
ROTARION PHOTO & ROTARION connected to the power supply
Shutter has not moved
/ advanced.
YES
Shutter has advanced
but does not hold the
position forward and
then always recoils.
YES
Содержание Rotarion Photo
Страница 1: ......
