Astronics OmniBusII Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 58

Astronics OmniBusII Скачать руководство пользователя страница 13

INTRODUCTION

The software distribution disk accompanying the OmniBus has example pro-
grams, drivers, and driver installation instructions for various operating systems,
and other information, files, and resources.

1.5 Support and Service

Ballard Technology offers technical support before and after purchase. Our hours
are 9:00

AM

to 5:00

PM

Pacific Time, though support and sales engineers are

often available outside those hours. We invite your questions and comments on
any of our products. You may reach us by telephone at (800) 829-1553 or (425)
339-0281, by fax at (425) 339-0915, on the Web at www.ballardtech.com

,

or

through e-mail at [email protected].

1.6 Updates

At Ballard Technology, we take pride in high-quality, reliable products that meet
the needs of our customers. Because we are continually improving our products,
periodic updates to documentation and software may be issued. For access to the
most current information and software, please register for a support account on
our website.

OmniBus II PCIe/PXIe User’s Manual

1-5

«
...
11
12
13
14
15
...
»

Содержание OmniBusII



























































Отзывы:

Нет отзывов