background image

Push slider up in order to move head vertically (TILT). Gradual head adjustment from one end 
of the slider to the other. The head can be turned by 280° and stopped at any position you 
wish. 

Channel 3 - rotating gobo-wheel 

0 - 15                        Open/hole 
16-31                     Gobo 1 
32-47                     Gobo 2 
48-63                     Gobo 3 
64-79                     Gobo 4 
80-95                     Gobo 5 
96-111                       Gobo 6 
112-127                    Gobo 7 
128-255                    Gobo wheel rotation from slow to fast 

Channel 4 - Colour-wheel 

0-15                                       Open / white 
16-31                                        pink 
32-47                                        yellow 
48-63                                        orange 
64-79                                        green 
80-95                                        red 
96-111                                      blue 
112-127                                   purple 
128-255                                 rainbow effects in both directions   

Channel 5 - Rotating gobo index, rotating gobo rotation 

0 - 127                  forward gobo rotation from slow to fast 
128 - 252               backward gobo rotation from slow to fast 
253-255                  gobo to be static 

Channel 6 – shutter and strobe 

0-50                     shutter open 
51-220                   strobe from slow to fast 
221-255                   shutter open 

Channel 7 – four-facet prism 

0-255

                       static prism 

Channel 8 – prism rotation 

0-159                           clockwise prism rotation 
160-255                      counter clockwise prism rotation 

Channel 9 - focusing 
Channel 10 - reset

Channel 11 - prism rotation

0-159   

 

 

clockwise prism rotation

160-255 

 

 

counter clockwise prism rotation

Channel 12 - focusing

Channel 13 - gobo indexing

Channel 14 - reset 

Содержание X-TORM 300









Отзывы: