Capacitance
Range
Resolution
Accuracy
60nF
10pF
600nF
100pF
6uF
1nF
60uF
10nF
600uF
100nF
20uF
10uF
±(8% of rdg + 5dgts)
Overload Protection: F0.4A/600V fuse
Open circuit voltage: about 0.5V
Frequency (Auto Ranging)
Range
Accuracy
0~60MHz
±
(1.0% + 5)
Overload Protection: 250V DC/AC RMS
OPERATING INSTRUCTIONS
Voltage Measurement
1. Connect the black test lead to the “COM” jack and the red test lead to the “INPUT ” jack.
2. Set the function switch to V or V
range. Choose either Auto or Manual range using
the “Range” Button.
3. In manual range, if the voltage magnitude to be measured is unknown beforehand,
select the highest range.
4. Connect the test leads to the source or load to be measured.
5. Read LCD display. The polarity of the red lead connection will be indicated when making
a DC measurement.
Note:
a. When measuring small ranges, the multimeter’s display will sometimes show an
unstable result if the test leads are not connected to the load being measured. This is
normal and will not affect measurements.
