ASTRO VG-870, Инструкция по эксплуатации

Страница: 365 / 499

Chapter 4 INDIVIDUAL FORMATS FOR CONTROL COMMANDS
351
4.9 SPD [4DH]: Program data registration
Function: This command registers all the data of the designated program number.
The registered data is either digital data or analog data. When the program
number is 0, it writes the data into the buffer RAM.
Sequence: Type 4
Command:
STX 1 byte 02H
SPD 1 byte 4DH
Program number 1 to 3 bytes
“0” to “849”
ETX 1 byte 03H
Fig. 4-9-1
Data:
(1) Digital data
STX 1 byte 02H
TRDT 1 byte 10H
Horizontal timing 30 bytes Refer to Fig. 4-1-2.
Delimiter 1 byte
“, “
Vertical timing 34 bytes Refer to Fig. 4-3-2.
Delimiter 1 byte
“, “
Digital output condition 23 bytes Refer to Fig. 4-5-2.
Delimiter 1 byte
“, “
Graphic color 12 bytes Refer to Fig. 4-7-2.
Character 8 bytes Refer to Fig. 4-7-3.
Crosshatch 8 bytes Refer to Fig. 4-7-4.
Dot 8 bytes Refer to Fig. 4-7-5.
Circle 1 byte Refer to Fig. 4-7-6.
Burst 5 bytes Refer to Fig. 4-7-7.
Window 22 bytes Refer to Fig. 4-7-8.
Optional pattern 1 2 bytes Refer to Fig. 4-7-9.
Note)
2 bytes “00” to “0F” for digital data
Optional pattern 2 2 bytes Refer to Fig. 4-7-10.
Note)
2 bytes “00” to “0F” for digital data
Delimiter 1 byte
“, “
Color bar 26 bytes Refer to Fig. 4-7-11.
Delimiter 1 byte
“, “
Gray scale 49 bytes Refer to Fig. 4-7-12.
ETX 1 byte 03H
Fig. 4-9-2