ASTRO SR-8450, Инструкция по эксплуатации, Страница: 42 / 65

Chapter 4 Operation from the remote controller
42
4.6.10 Set the Transition Color for clips in a playlist
⚫
To set the Transition Color of a clip stored in a playlist, follow these steps:
1
Follow the instructions in
[4.5.1]
to specify Page, followed by BANK10.
2
Among the
【
F1
】
~
【
F10
】
buttons, the button that has already created a playlist lights up green, so press the button
corresponding to the playlist containing the clip you want to edit the playback speed from among these, and select
the playlist.
3
Press the
【
Loop/PLST
】
button to display the list of clips stored in the playlist.
4
After pressing the 【 Insert / Browse 】 button, operate 【 Jog 】 and move the cursor to the clip you want to edit the
playback speed.
5
After pressing the 【 SHIFT 】 button, press the 【 B 】 button to display the setting screen.
6
Press the
【
F1
】
~
【
F3
】
button and select R, G, B and adjust the Transition Color by operating
【
Jog
】
.
7
Press the
【
ENTER
】
button to complete the setting. Press the
【
CLEAR
】
button to cancel it.
・
Each color can be set in the range of 0~255.
・
A color swatch appears in the settings
.
・ It does not apply when the Transition type is Cut or Mix.
4.6.11 Delete clips in a playlist
⚫
To delete a clip stored in a playlist, follow these steps:
1
Follow the instructions in
[4.5.1]
to specify Page, followed by BANK10.
2
Among the
【
F1
】
~
【
F10
】
buttons, the button that has already created a playlist lights up green, so press the button
corresponding to the playlist containing the clip you want to delete from this playlist and select the playlist.
3
Press the
【
Loop/PLST
】
button to display the list of clips stored in the playlist.
4
After pressing the 【 Insert / Browse 】 button, operate 【 Jog 】 and move the cursor to the clip you want to delete from
the playlist.
5
When you press the 【 D 】 button, a confirmation message is displayed.
6
Press
【
ENTER
】
to delete the selected clip.
【
CLEAR
】
to cancel it.