ASTRO SR-8450, Инструкция по эксплуатации, Страница: 34 / 65

Chapter 4 Operation from the remote controller
34
4.5.3 Play a clip
⚫
To play a clip, follow these steps:
➢
Here, as an example,
Suppose that the clip is registered with the same Page, BANK, and clip numbers as in the example
shown in [4.5.1]
, and you want to play clip 7 registered in BANK8 on Page 9.
1
Follow the instructions in
[4.5.1]
, and specify Page, BANK.
2
Among the 【 F1 】 ~ 【 F10 】 buttons, the button that has already registered the clip lights up green, so press the button
corresponding to the clip number you want to play from among these.
➢
Among the
【
F1
】
~
【
F10
】
buttons, the button corresponding to the selected clip number lights up red.
➢
As an example, clip 7 is played here, the
【
F7
】
button will light up red.
3
The selected clip is played by pressing the
【
NetWork/PLAY
】
button or moving
【
T-Bar
】
.
➢
The
【
NetWork/PLAY
】
button will light up green.
4
To stop playback, press the
【
Page/STOP
】
button.
➢
The
【
Page/STOP
】
button lights up green.
5
After pressing the
【
SHIFT
】
button, press the
【
Goto In/IN
】
button to the first frame of the selected clip, and press
the
【
Goto Out/OUT
】
button, Moves to the last frame of the selected clip.
➢
Also, the
【
Jog
】
operation moves to any frame in the clip.
・
After
the clip is played and the OUT point is exceeded, post-roll playback is performed within the set time.
(For details,
refer to About guard bands in
[4.8 MENU] ).
・
Loop playback is enabled by pressing the buttons
【
SHIFT
】
→
【
Loop/PLST
】
to enable Loop playback and play the selected clip
in Loop.