ASTRO SR-8450, Инструкция по эксплуатации, Страница: 37 / 65

Chapter 4 Operation from the remote controller
37
4.6 Operations about a playlist
⚫
With this device, it is possible to create playlists that combine any clip. This article describes the following seven
operations about playlists.
⚫
Playlists are stored in BANK10, which is a "playlist-only bank" built into each Page.
⚫
Since each BANK10 having 9 Pages built in this device can create 10 playlists each, You can create up to 90
playlists with this device.
⚫
You can add up to 100 clips to a playlist.
4.6.1 Create a new playlist
⚫
To create a playlist, follow these steps:
1
Follow the instructions in
[4.5.1]
to specify Page, followed by BANK10.
2
If you press the button that does not light up green among the
【
F1
】
~
【
F10
】
buttons, a confirmation message will
be displayed.
3
Press 【 ENTER 】 to create an empty playlist with the corresponding playlist number. 【 CLEAR 】 to cancel it.
4.6.2 Playing a playlist
⚫
To play a playlist, follow these steps:
1
Follow the instructions in
[4.5.1]
to specify Page, followed by BANK10.
2
Among the 【 F1 】 ~ 【 F10 】 buttons, the button that has already created a playlist lights up green, so press the button
corresponding to the playlist you want to play from among these buttons and select the playlist.
3
Press the 【 NetWork/PLAY 】 button or move 【 T-Bar 】 to play the selected playlist.
➢
The
【
NetWork/PLAY
】
button will light up green.
4
To stop playback, press the 【 Page/STOP 】 button.
➢
The
【
Page/STOP
】
button lights up green.
5
After pressing the
【
SHIFT
】
button, press the
【
Goto In/IN
】
button to go to the first frame of the very first clip in the
selected playlist, and press the
【
Goto Out/OUT
】
button, Moves to the last frame of the very last clip.
➢
Also, the
【
Jog
】
operation moves to any frame in the clip.
・
After the OUT point is exceeded after the playlist is played, post-roll playback is performed within the set time.
(For details,
refer to About guard bands in
[4.8 MENU] ).
・
By pressing the buttons
【
SHIFT
】 → 【
Loop/PLST
】 , Loop playback is enabled, and the selected playlist is played back by Loop.